[Re-Mix-Milk]

if i change my intake (it cost about $300) how much HP can my car increase ?! ..
cuz the technician told me it can increase around 10HP
and i dun believe it ...

btw

C32 AMG ...

[Zeta]

so how much hp gain do u expect?

[BBQ-mAn]

you drive a C32, spending 300 bucks on your car won't get it much faster
you want your car to go less than 5 seconds?

[Re-Mix-Milk]

我也沒有說很想改　只是不太相信那個人說的
要改我想存錢改 Brabus C32 Kit .. but .too expensive/____\

[Zeta]

最初由 Re-Mix-Milk 發表
我也沒有說很想改　只是不太相信那個人說的
要改我想存錢改 Brabus C32 Kit .. but .too expensive/____\

intake alone will not give u much result.... 10hp is a reasonable estimate. u're get better result with intake+exhaust. then u can change the pully to increase power that when u can actually feel the hp gain. but then to be truthfully, u alreay have 350 hp, u can hardly feel anything for less than 20hp gain.
my friend said that he can get the brabus kit cheap... if u are interested i can ask him about it. BTW, how much was the Barbus kit u quote?

[DinoKilla]

not sure maybe u should get a chip instead for more gain but $300 for a cai is not bad. mine cost $1500 >.<but it came with the software

[Basic13]

damn u guys are rich -___-"

[eason_c]

最初由 Re-Mix-Milk 發表
if i change my intake (it cost about $300) how much HP can my car increase ?! ..
cuz the technician told me it can increase around 10HP
and i dun believe it ...

btw

C32 AMG ...

I would suggest you get a Pulley Kit for you C32 instead. The pulley alone should give you appox 400hp for your C32.:) I think ASP does offer one for cheap.. appox $450CDN... at least that's what they charge for the pulley for the C230K.

[Re-Mix-Milk]

最初由 Zeta 發表

intake alone will not give u much result.... 10hp is a reasonable estimate. u're get better result with intake+exhaust. then u can change the pully to increase power that when u can actually feel the hp gain. but then to be truthfully, u alreay have 350 hp, u can hardly feel anything for less than 20hp gain.
my friend said that he can get the brabus kit cheap... if u are interested i can ask him about it. BTW, how much was the Barbus kit u quote?

errr...my car is in States ....i'm ganna go over there study ...so..yah..thanks for the informations ./:)

[Re-Mix-Milk]

最初由 eason_c 發表


I would suggest you get a Pulley Kit for you C32 instead. The pulley alone should give you appox 400hp for your C32.:) I think ASP does offer one for cheap.. appox $450CDN... at least that's what they charge for the pulley for the C230K.

wuts Pulley kit ?!@@